Audi Club Vehicle Considerations
Technical inspection of your car by the Audi Club is not a guarantee by the club of your car’s track worthiness. You are responsible for your car. The purpose of the club’s technical inspection is to search for obvious vehicle shortcomings that would inevitably cause a delay in the event’s schedule.
The Audi Club strongly encourages all participants to have their vehicle serviced by a professional automobile service technician prior to attending the driving school.
Listed below are examples of items we look for when technically inspecting your car. We strongly encourage all participants to review this list as part of the pre-event servicing referenced above.
- BATTERY: securely mounted
- ALTERNATOR & FAN BELTS: no cracks in belts, belts tight
- FUEL LINES: no leaks, no crimped or pinched lines
- THROTTLE LINKAGE: travels and returns freely
- COOLING SYSTEM: clean antifreeze, no leaks
- BRAKE FLUID: clean, no air bubbles, reservoir full, DOT4
- BRAKE PEDAL: firm, full pedal
- BRAKE LIGHTS: operational
- BRAKE PADS: more than 3/16” thickness
- BRAKE CALIPERS: clean and dry
- BRAKE LINES: no cracks or leaks
- WHEEL BEARINGS: no play, tightened properly
- WHEELS: no cracks, lug nuts/bolts properly torqued
- TIRES: H rated or higher, street tires at least 3/32” tread, track tires must have no cords showing.
- TIE RODS AND ENDS: not bent or worn, no play in tie rod ends
- TURN SIGNALS: operational
- SUSPENSION: no excess play, no rust at stress points
- SHOCKS: no leaks, firm
- EXHAUST: intact, no breaks or leakage, must meet track’s noise restriction
- ENGINE/TRANSMISSION: no leaks
- GLASS: no significant cracks
- MIRRORS: (interior and exterior) operational
- SEAT BELTS: operational
- ROLL BAR/HOOPS/CAGE: required for all convertibles, (see requirements for convertibles)
- FIRE EXTINGUISHER: if present, must be securely mounted